软管泵,路面抛丸机工厂现货供应

软管材质：天然橡胶，采取单管与双管设计； 软管通径约小规格15mm； 规格100mm；流量小规格0.15立方/小时； 规格80立方/小时；出口压力 1.6MPA ； 性能特性高含固量的流体、半流体；腐蚀、非腐蚀；  颗粒 软管通径的1/4,无尖锐棱角；低压短距离吸送，无阀工作，无回流，泵送料流稳定，故障率低。 进排口可自由转换，当有异物堵塞时，倒转便可排出堵塞物；真空度高，自吸能力强 ；维修简单快捷，易损件少（仅挤压软管） ；适用温度小于90℃。           

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.

软管泵可输送汽、液、固等三相混合物料。可以输送的介质的粘度可高1000000CP和含固量达55%的浆料。 结构紧凑，维护方便，几乎无易损件，运行成本低。专门针对输送内含大颗粒物料二设计制造，其独特的结构形状和使其能够在输送内含大颗粒物料时具有其他泵中不可比拟的优越性，经其输送的物料保持原有品质不变，是输送含颗粒物料泵的 。